Top 5 Ways To Boost And Increase Internet Speed On PC

Hello, Friends, Welcome to TechOnn. Today, I am going to post 5 ways to boost and increase internet speed on pc.

Method 1 (For BSNL Broadband Users) :

One of the major problems with BSNL Dataone Broadband connection is the DNS servers they provide by default. Most of the time they are very slow and sometimes they fail to respond. I noticed that I am starting to spend a significant amount of time in DNS resolution with Dataone connection, often it is larger than the time it takes to actually get the reponse. Here is a simple solution to significantly speed up your DNS resolution.

Open up the network connection profile and edit TCP/IP settings. In the DNS server address fields, specify the following DNS server addresses: 208.67.222.222 and 208.67.220.220. Disconnect the connection and then connect again. You are done. This specifies third party DNS servers which are significantly faster than BSNL Dataone's DNS servers.

Note: The service is provided by OpenDNS.

Method 2 : Use Full net bandwidth

In Windows 200th of net bandwidth is reserved that is used for windows updates and internal machine. This is reserved for windows’s personal use.You must disable this and obtain full net bandwidth. Cut the windows a part of bandwidth and you’ll be able to boost internet speed. There’s no got to install any additional software to try and do this.

Step 1 : Open RUN (Win Key + R ) and type gpedit.msc and click Ok.

Step 2 : Now click on the Computer Configuration.

Step 3 : Now click on Administrative Templates.

Step 4 : Now Click on Network.

Step 5 : Now Click on QoS Packet scheduler.

Step 6 : Double Click Limit Reservable bandwidth.

Step 7 : First Click on Enabled.

Then modify bandwidth Limit(%) to 0 (zero). As per screenshot.

Then Click OK.

After click OK button you have now cut the a part of windows bandwidth. there’s no reserved bandwidth currently. you’ll feel a difference that net speed is optimized currently.

Method 3 :

Do you know by default IPv6 is also installed in Windows, however most of the devices still utilize the IPv4 protocol – and to assume that almost all home networks are totally upgraded to the IPv6 protocol is a faulty approach to setting defaults.the very first thing you must do before we are able to even get started speeding up the net, is to disable IPv6 so you can a minimum of get on the net in the 1st place. Here’s how it works.

First, go to Start -> Network -> Network and Sharing Center, and then click on “Manage Network Connections/Change Adapter Settings”.

Now Right Click On the Network You are using, And then click Properties.

You’ll see that both IPv6 and IPv4 enabled. Uncheck box of IPv6 and click on “OK”. You then need to reboot your pc, however afterwards if the protocol incompatibility was your problem (and it very likely was), you’ll realize that your pc can currently communicate fine with the router.

Method 4 :

Go to start and type "regedit". On Regedit, navigate to "HKEY_LOCAL_MACHINE/SOFTWARE/Policies/Microsoft/Windows".

Right-click on Windows and build a brand new key name the key "Psched".Then right click on the right handside of panel and build a brand new "DWORD" entry. Name it "NonBestEffortLimit" and set the value to zero to disable reserve bandwidth.

Method 5 : Use CCleaner

Sometimes your computer is filled with browsing history, cache and cookies. you’ll be able to download CCleaner free that is best software system to remove the garbage from C Drive. CCleaner will ultimately have an impression on net speed.